LASER CUTTING For my handphone stand design, I wanted to go with something cool and interesting but after researching and thinking for a bit, I had decided to do a clean and sleek hand phone stand with a print/etch/design on the back. this is the design I will be going for. Its simple and clean and can I can easily add a design at the back. Now onto actually making the handphone stand. The first step is the easiest, press sketch and draw a simple line of 80mm The second step is to roughly draw a line like this. For now we don't need to worry about the specific of the angles and lengths too much as we will be adjusting that later on. The third step is to do roughly the same thing just that this line is specified to be 70mm. The fourth step is where we start to get specific but don't worry, we will be taking it slow and easy. For this step, we will use sketch dimensions and select the lines drawn in the second and third step and adjust the angle in between t...
Comments
Post a Comment